BUILDING MATERIALS

Note: Coverage Area calculated base on 10mm mortar thickness. Tolerance of ± 3mm in product dimension is to be expected. Efflorescence may happen on any cementitious product. Website images for illustration purpose, final selection should be made from actual product samples.

Greenseal Flexi 201 is a flexible cementitious waterproofing that consists of two components. It consists of Portland cement, and selected well graded sand, formulated with specially selected and graded fine quartz and high quality latex to create brushable, smooth slurry with excellent bond and adhesion to most substrates.

Greenseal Injection Grout is a high strength grout specially formulated for grouting purposes. Due to its non-shrink properties it will not shrink when grouted into the pores and capillaries of concrete.

Greenshield 108 is an excellent energy conserving elastic coating designed for roof, walls and substrates that requires heat reflective & waterproofing protection. Greenshield 108 is a “green” product that is eco-friendly and is safe for both the applicator and the environment. It is recommended for exterior use for all residential and commercial buildings.

weberklin is an acid-based detergent, which is designed to easy grout cleaning, remove scale deposition and grout haze. This special formulation makes no harm to ceramic mosaic tiles, aluminium and glass surfaces

Substrate preparation :

• Remove dust, loose particles, grease and traces of foreign materials that may affect adhesion

Mixing & Installation

• 14.4 Ltr of clean water mix with one bag (40kg) E.MIX ALC Thin Mortar
• Allow mixture to stand for 10 minutes for additives to dissolve.

• Reinforce waterproof layer
• Improve bonding of waterproof to substrates
• Use with skim coat to reinforce between 2 pieces of dry walls
• Durable with high strength

• New concrete should be cured for at least 28 days and should have a pull off strength ≥1.5 N/mm².

• New concrete should be cured for at least 28 days and should have a pull off strength 1.5 N/mm². Cement or mineral based substrates must be prepared mechanically using abrasive blast cleaning or scarifying equipment to remove cement laitance and to achieve an open textured surface.

• Provide a durable,flexible,seamless waterproofing tanking system
• Suitable for application & provides good adhesion to substrates
• Provides waterproofing system where Ceramic Tiles etc, can be fixed directly, using Belle's range adhesive
• User friendly, less time consuming and cleaner

wo-component with latex cementitious coating, which can be simply achieved by mixing a prepacked powder with a formulated admixture, and subsequent painting the slurry on various substrates. It protects a wide range of buildings and structural concrete components with excellent resistance to water, long-term weathering and scratching.

• Concrete, Cement-Sand Render / Screed & Masonry surface must be fully cured, dry, sound, flat or true & free of contaminants eg. grease, oil, dust, loose particles, laitance etc.
• Steel / Metal surface must be free of scales, rust, grease, oil etc.
• Damp the surface before coating and sweep the excess water to avoid ponding on the horizontal area.

• Concrete, Cement-Sand Render / Screed & Masonry surface must be fully cured, dry, sound, flat or true & free of contaminants eg. grease, oil, dust, loose particles, laitance etc.
• Steel / Metal surface must be free of scales, rust, grease, oil etc.
• Damp the surface before coating and sweep the excess water to avoid ponding on the horizontal area.

• The substrate should be clean and sound. Free from any contamination including oil, grease, laitance and dust. For maximum bonding, the surface should be roughened and dampen with clean water.
• Immediately prior to grouting remove free standing water.
• Metal surface must be free from rust, scale, oil or grease.

• Shake well before use
• Read weber technical data sheet for mixing ratio based on different application usage

ready to use, multi-function, synthetic latex admixture, suitable for a variety of building applications.

• As some solid matter in webermix GT mix I may settle during storage, it is essential to stir well before use in temperature lower than 4°C

• Allow adhesive bed to set, usually 24 – 48 hours before grouting commences. Joints must be dry and free of contaminants ie.

• Introducing WEBERFILL EPOXY GROUT, a multi-colored, chemical and waterproof epoxy resin-based grout from MAN KIAN HARDWARE & TRADING SDN BHD that brings exceptional durability and aesthetic appeal to your tiling projects.

• Ensure that joints are dry, clean or free of contaminants.
• Mix weberfill ultra plus grout with Clean Water as per the recommended mix ratio.
• Mechanical mixing is recommended to obtain a uniform coloured mortar. Ensure pigments are thoroughly dispersed during mixing.

• Suitable for joints up to 8 mm wide.
•  Water repellant tile group .
• Stain resistant .
• Durable yet semi flexible. 
• long lasting & enhanced color .
• 1&20 kg bag .

During tiling allocate minimum joints of 2 mm wide for wall tiling 3 mm wide for floor tiling.
Allow adhesive bed to set 24 hours before grouting commences.
Ensure that joints are dry, clean or free of contaminants. Mix weberfill F&W grout with Clean Water (or webermix GT mix I) as per the recommended mix ratio.

• During tiling allocate minimum joints of 2mm wide for wall tiling & 3 mm wide for floor tiling.
• Allow adhesive bed to set 24 hours before grouting commences.
• Ensure that joints are dry, clean or free of contaminants.
• Mix weberfill fine grout with Clean Water (or webermix GT-mix I) as per the recommended mix ratio.

• Substrate must be dry, sound, flat / true & free of contaminants.
• Ceramic Tiles are to be fix dry. Do not soak in water.
• Mix weberset super star with water (or Latex Admixture) as per the recommended mix ratio. Mechanical mixing recommended.

• Substrate must be dry, sound, flat / true & free of contaminants.
• Ceramic Tiles are to be fix dry. Do not soak in water.
• Mix weberset x'tra flex (LD) with water (or Latex Admixture) as per the recommended mix ratio. Mechanical mixing recommended.