IWAH

Featured here are the most common fork sizes and variations. All with wire size and also swage depth marking. Fork terminals are amongst the most commonly used wire end fittings, they are normally attached to pre drilled anchor plates or steel constructions. Also used in combination with toggles, eyes or U-bolts.

A screw jack consists of a heavy-duty vertical screw with a load table mounted on its top, which screws into a threaded hole in a stationary support frame with a wide base resting on the ground. A rotating collar on the head of the screw has holes into which the handle, a metal bar, fits.

Very solid Retractable Type Fall Arrester with metal case. May only be used together with Full Body Harness according to EN 361 Retractable Type Fall Arresters are subject to competent inspection once a year.

Cable Grips, often known as Cable Socks, Cable Stockings or Chinese Fingers are hand woven using galvanised stranded high tensile steel wire, they are a quick and efficient way of installing and controlling a whole host of electrical cables.

Duct Rodders are composed of fiber glass rod which was extruded by fiber glass and high strength resin at high temperature. This type of rod has high tensile strength and flexibility.

electric clutch winch is a kind of electric hoists which can be applied to the ground and high altitude. it's widely used 

in construction industry.It possesses the advantage of large lifting capacity,high lifting height and smooth operation.

▪️ Double safety brake devices 
- Safe hold of the load even in case of electric failure due to mechanical ratchet brake
 
▪️ Compact and light weight design 
- Easy carry and installation
 
▪️ Swivel lower hook 
- Made by forging formation and installed with a safety latch
 

Round Slings are manufactured to EN 1492-2 and have a safety factor of 7:1 The load bearing fibers are wound together to form an endless hank.
The working load limit is determined by number of turns in the hank.

MUST READ BEFORE USE

• Failure to comply with warning may result Tie Down failure, serious personal injury or death.
   Use of this product demonstrates an understanding of this warning and the risks involved.
• Never exceed working load limit. Inspect before each use.

▲ Clamp for the horizontal lifting of “H”, “I”, “T”, “L” shaped structured steel and plate steel.
▲ Manufactured form high quality carbon steel.
▲ Avoid snatch or shock loading.
▲ The roller at the head of the hook will not damage the sling rope.

Horizontal lifting clamp is designed to lift and move single steel plate, steel structure and profiled bar horizontally which weight below or equal to the working load limit of the clamp. The unique design of the clamp is that the cam grips tighter when heavier load. The construction of the plate cla mps utilizes drop forged processes for the strength and durability.

Horizontal lifting clamp is designed to lift and move single steel plate, steel structure and profiled bar horizontally which weight below or equal to the working load limit of the clamp. The unique design of the clamp is that the cam grips tighter when heavier load. The construction of the plate cla mps utilizes drop forged processes for the strength and durability.

Beam clamps are designed to provide steel-to-steel connections between structural beams eliminating the requirement for drilling, welding or other attachment techniques. Beam clamps can be clamped to a beam and used as rigging devices for hoist equipment pulley blocks or loads.

vertical lifting clamp has wider jaw compare to other model, it is designed to lift single steel plate and steel structure vertically which weight below or equal to the working load limit of the clamp. The spring locking system ensure the clamp is always locked to prevent slip while lifting or unload the object.

Grade 80 Alloy Clevis Sling Hook with Latch
Material : High Tensile Forged Alloy Steel
Construction: Quenched and Tempered
Finish : Powder Coated
Proof Load : Proof Load Tested at 2.

MASTER LINK

Material : High Tensile Forged Alloy Steel
Construction : Quenched and Tempered
Finish : Powder Coated
Proof Load : Proof Load Tested at 2.0 times of Working Load Limit
Safety Factor: 4 to 1
Fatigue : Fatigue Tested at 1.

100% BRAND NEW
100% ORIGINAL PRODUCT
HIGH QUALITY PRODUCT
EASY TO INSTALL

-These galvanized steel thimbles are for use with steel wire rope. They are inserted inside the look to preserve the natural shape of the loop and protect the cable from any damage.
-Greater protection against wear and deformation of the wire rope eye.

Stainless steel sus 304 is the most popular stainless steel in the world today, an alloy between steel and nickel, Manganese, chromium metals. The percentage of Niken in 304 stainless steel is at least 8%.With outstanding features such as: less discoloration, anti-oxidation and corrosion, high durability...

PRODUCT SPECIFICATION 

PRODUCT : TESTING SERVICES 
MODEL : WPT - 200
CAPACITY : 200 TON
STANDARD USEFUL TESTING LENGTH : 6.2 M
OVERALL LENGTH : APPROX . 10.7 M
OVERALL WIDTH : 1650 MM 
WIDTH BETWEEN CHANNELS : 695 MM 
MAX .

Stainless steel wire rope is a kind of rope made of twisted stainless steel wires, which is widely used in a variety of industrial fields, and can maintain a long service life in harsh environments due to its features of corrosion resistance, high temperature resistance, high strength, and good oxidation resistance.

BRAND : IWAH
PRODUCT : WIRE ROPE & STRANDS
MODEL :
6x5(19)+IWRC
6xFI(29)+IWRC
6xWS(36)+IWRC
6xSES(37)+IWRC
8xW(19) +IWR C
6x7+FC& PVC
6x19+FC& PVC
7x7 S/S & PVC
7x19 S/S & PVC
19x7 N.

BRAND : IWAH
PRODUCT : WIRE ROPE & STRANDS
MODEL :
6x7+FC
6x 12+FC
6x19+FC
1x19+S/S
7x7 S/S
7x19 S/S
8xWS(36) +IWRC
35x7+MULTI-STRAND  

Wire rope is a complex mechanical device that has many moving parts all working in tandem to help support and move an object or load.