WATER PROOFING

APPLICATION 
- Used in home , shopping malls,
 railway stations, airports

CONSTRUCTION 
- Plastic body with Flame retardant
 materials
- Full copper

Product type: Isolating Switch
Colour: White
[Ie] rated operational current: 20A at 440 V 35A / 63A
Poles description: 3P

A Solvent Free Single Component Elastomeric Liquid

Obaproof WP-200HD is a solvent free single component elastomeric liquid applied waterproofing putty membrane designed to cure to a flexible seamless wave membrane.

Coverage:
On roofs and terraces: at least 1.5kg/m? in two or more coats, depending
on the substrate..

Water-Based PU Bituminous Waterproofing Membrane

Obaproof WP-100HD is a water-based PU Bituminous Waterproofing membrane. It is a liquid type waterproofing coating and cure to form as a seamless, elastic waterproofing layer.

Application:
With brush, roller or spray method apply the first coat of Obaproof WP-100HD on the application surface.

Transparent Protecting Acrylic Coating

Obaproof Slate-Seal 800 is a specially formulated colourless protective coating with added Ultra Violet (UV) additive for treatment of interior and exterior concrete surfaces against scratching. Obaproof Slate-Seal 800 suited for slate, quarry and paver tile, stamped concrete and concrete tile.

Colorless Silicone Waterproofer

Obaproof WaterPruf Sealer is specially formulated silicone which is based on silane / siloxance for impregnating to cement and other porous surfaces.It provides a good penetration capacity and good alkaline resistance.

Suitable for:
1.

• Solvent-Free, Friendly To Environment
• Non-Curing, Resistance To Crack Under Various Weather Conditions
• High Tensile Strength And Flexibility
• Boundless Design, Neat And Beautiful

Obaproof Flash Tape is a super strong, rubberized, waterproof tape that can patch, bond, seal and repair virtually everything! Obaproof Flash

Rapid Setting Mortar For Plugging Leaks

Obaproof Waterplug 110 is a ready to use rich blend of special cements and chemical in single part dry powder form needing only the addition of clean water to produce an ultra fast setting mortar.

Ready Mixed Plaster

Obaproof Premix Plaster 9921 is a special formulated cement-sand base render contains cement, graded sand and chemicals for a wide range of application from wall rendering to bricklaying. It is pre-packed cement and sand plaster to replace the traditional on-site mixes of cement and sand.

Non-Metallic Floor Hardener

Obaproof Oba Floor Hardener is a ready to use, dry shake, non-metallic floor hardener. It is composed of cement and hard aggregates of mineral origin. The particles used have been selected for their shape, grading, and high physical and mechanical quality.

Specifications

SKU: mapei 223

Pumpable Shrinkage Compensated Cementitious Grout

Obaproof Oba Grout 2215 is a pumpable dual-shrinkage compensated, selflevelling, pre-bagged cementitious grout with extended working time to suit local ambient temperatures.

High Performance Cementitious Tile Adhesive

Obaproof F2-288 is a high performance, thin layer, cementitious tile adhesive,supplied ready to use with the addition of water, for bonding ceramic
tiles,porcelain tiles and mosaics of every type of floors, walls.

Cementitious Tile Adhesive

Obaproof F2-222 is a high strength powdered adhesive for floor applications. Suitable to use over concrete, screeds, fibrous cement sheeting and Obaproof approved waterproof membranes. Obaproof F2-222 is recommended for all internal application.

用途：
適用于薄層施工粘結瓷磚

特性：
- 應用簡單，優異的可操作性和觸變穩定性​​​​​​​
- 可良好粘結常見基材如混凝土，水泥砂漿，石頭，磚塊等

Cementitious Tile Adhesive
Obaproof F1-88 is water resistant cement- based, thin or medium bed adhesive, suitable for fixing ceramic tiles, etc. to wall and floor, dry or wet interior and exterior areas with very good adhesion strength.

Cementitious Waterproofing Slurry

Obaproof Oba EasyCoat WP is a cementitious two part polymer- modified product which is mixed to a slurry consistency and applied to concrete and mortar to provide waterproofing.

Polymer-Modified, Flexible, Cementitious

Waterproofing Coating Obaproof AB Top Seal 119 is a cementitious, two-part, polymer-modified flexible waterproofing coating. It is applied to concrete and mortar to prevent water infiltration.

Carboxylated Styrene Butadiene Resin

Obaproof SBR Latex 888 is a superior quality waterproofing copolymer latex with a blend of special auxiliary chemicals. It is a water base dispersion of synthetic polymer which will substantially improve the workability of concrete and mortars used for repairs, floor toppings and renders in building and construction industry.

Carboxylated Styrene Butadiene Resin

Obaproof SBR Latex 188 is a superior quality waterproofing copolymer latex with a blend of special auxiliary chemicals. It is a water base dispersion of synthetic polymer which will substantially improve the workability of concrete and mortars used for repairs, floor toppings and renders in building and construction industry.

Concrete & Mortar Waterproofing Admixture

Obaproof Oba-Waterproof is concrete and mortar waterproofing Modified polymer liquid admixture that acts as a highly efficient plasticiser and
waterproofing agent.

High Efficiency Concrete Curing Compound

Obaproof Con-Cure III curing compound is a range of liquid curing compounds for the prevention of premature water loss in concrete. Obaproof Con-Cure I1I is applied to fresh concrete surfaces to form a fast dry.

Bonding Agent & Adhesive Strength Additive

Obaproof Latex 999 is a cement modifier, consisting of Latex polymer emulsion for enhancing the adhesion strength of mortar, tile adhesive cement, plastering cement, cement/ sand screed, render repair mortar,grouting cement and etc.

Crystallization Admixture Waterproofing

Obaproof WP-502 Crystallization Admixture Waterproofing is kind of powdered form is ready to be mixed with the cement.

Greenseal Flexi 201 is a flexible cementitious waterproofing that consists of two components. It consists of Portland cement, and selected well graded sand, formulated with specially selected and graded fine quartz and high quality latex to create brushable, smooth slurry with excellent bond and adhesion to most substrates.

Greenshield 108 is an excellent energy conserving elastic coating designed for roof, walls and substrates that requires heat reflective & waterproofing protection. Greenshield 108 is a “green” product that is eco-friendly and is safe for both the applicator and the environment. It is recommended for exterior use for all residential and commercial buildings.

• New concrete should be cured for at least 28 days and should have a pull off strength ≥1.5 N/mm².

• New concrete should be cured for at least 28 days and should have a pull off strength ≥ 1.5 N/mm².
•  Cement or mineral based substrates must be prepared mechanically using abrasive blast cleaning or scarifying equipment to remove cement laitance and to achieve an open textured surface.

• New concrete should be cured for at least 28 days and should have a pull off strength 1.5 N/mm². Cement or mineral based substrates must be prepared mechanically using abrasive blast cleaning or scarifying equipment to remove cement laitance and to achieve an open textured surface.

• Provide a durable,flexible,seamless waterproofing tanking system
• Suitable for application & provides good adhesion to substrates
• Provides waterproofing system where Ceramic Tiles etc, can be fixed directly, using Belle's range adhesive
• User friendly, less time consuming and cleaner

wo-component with latex cementitious coating, which can be simply achieved by mixing a prepacked powder with a formulated admixture, and subsequent painting the slurry on various substrates. It protects a wide range of buildings and structural concrete components with excellent resistance to water, long-term weathering and scratching.

• Concrete, Cement-Sand Render / Screed & Masonry surface must be fully cured, dry, sound, flat or true & free of contaminants eg. grease, oil, dust, loose particles, laitance etc.
• Steel / Metal surface must be free of scales, rust, grease, oil etc.
• Damp the surface before coating and sweep the excess water to avoid ponding on the horizontal area.

• Concrete, Cement-Sand Render / Screed & Masonry surface must be fully cured, dry, sound, flat or true & free of contaminants eg. grease, oil, dust, loose particles, laitance etc.
• Steel / Metal surface must be free of scales, rust, grease, oil etc.
• Damp the surface before coating and sweep the excess water to avoid ponding on the horizontal area.

ready to use, multi-function, synthetic latex admixture, suitable for a variety of building applications.

• Introducing WEBERFILL EPOXY GROUT, a multi-colored, chemical and waterproof epoxy resin-based grout from MAN KIAN HARDWARE & TRADING SDN BHD that brings exceptional durability and aesthetic appeal to your tiling projects.

• During tiling allocate minimum joints of 2mm wide for wall tiling & 3 mm wide for floor tiling.
• Allow adhesive bed to set 24 hours before grouting commences.
• Ensure that joints are dry, clean or free of contaminants.
• Mix weberfill fine grout with Clean Water (or webermix GT-mix I) as per the recommended mix ratio.

• Substrate must be dry, sound, flat / true & free of contaminants.
• Ceramic Tiles are to be fix dry. Do not soak in water.
• Mix weberset super star with water (or Latex Admixture) as per the recommended mix ratio. Mechanical mixing recommended.