BUILDING MATERIALS, WEBER, WATER PROOFING

• New concrete should be cured for at least 28 days and should have a pull off strength ≥1.5 N/mm².

• New concrete should be cured for at least 28 days and should have a pull off strength 1.5 N/mm². Cement or mineral based substrates must be prepared mechanically using abrasive blast cleaning or scarifying equipment to remove cement laitance and to achieve an open textured surface.

• Provide a durable,flexible,seamless waterproofing tanking system
• Suitable for application & provides good adhesion to substrates
• Provides waterproofing system where Ceramic Tiles etc, can be fixed directly, using Belle's range adhesive
• User friendly, less time consuming and cleaner

wo-component with latex cementitious coating, which can be simply achieved by mixing a prepacked powder with a formulated admixture, and subsequent painting the slurry on various substrates. It protects a wide range of buildings and structural concrete components with excellent resistance to water, long-term weathering and scratching.

• Concrete, Cement-Sand Render / Screed & Masonry surface must be fully cured, dry, sound, flat or true & free of contaminants eg. grease, oil, dust, loose particles, laitance etc.
• Steel / Metal surface must be free of scales, rust, grease, oil etc.
• Damp the surface before coating and sweep the excess water to avoid ponding on the horizontal area.

• Concrete, Cement-Sand Render / Screed & Masonry surface must be fully cured, dry, sound, flat or true & free of contaminants eg. grease, oil, dust, loose particles, laitance etc.
• Steel / Metal surface must be free of scales, rust, grease, oil etc.
• Damp the surface before coating and sweep the excess water to avoid ponding on the horizontal area.

ready to use, multi-function, synthetic latex admixture, suitable for a variety of building applications.

• Introducing WEBERFILL EPOXY GROUT, a multi-colored, chemical and waterproof epoxy resin-based grout from MAN KIAN HARDWARE & TRADING SDN BHD that brings exceptional durability and aesthetic appeal to your tiling projects.

• During tiling allocate minimum joints of 2mm wide for wall tiling & 3 mm wide for floor tiling.
• Allow adhesive bed to set 24 hours before grouting commences.
• Ensure that joints are dry, clean or free of contaminants.
• Mix weberfill fine grout with Clean Water (or webermix GT-mix I) as per the recommended mix ratio.

• Substrate must be dry, sound, flat / true & free of contaminants.
• Ceramic Tiles are to be fix dry. Do not soak in water.
• Mix weberset super star with water (or Latex Admixture) as per the recommended mix ratio. Mechanical mixing recommended.

• Substrate must be dry, sound, flat / true & free of contaminants.
• Ceramic Tiles are to be fix dry. Do not soak in water.
• Mix weberset x'tra flex with water (or Latex Admixture) as per the recommended mix ratio. Mechanical mixing recommended.

• Substrate must be dry, sound, flat / true & free of contaminants.
• Ceramic Tiles are to be fix dry. Do not soak in water.
• Mix weberset easy flex with water (or Latex Admixture) as per the recommended mix ratio. Mechanical mixing recommended.

TILE ADHESIVE CEMENT

BRAND : WEBER

WEIGHT : 25KG

COLOUR : GREY

Tile adhesive for large Porcelain tiles on wall and floor.

ABOUT THE PRODUCT

-Substrate must be dry, sound, flat / true & free of contaminants.

-Ceramic Tiles are to be fix dry. Do not soak in water.

• Substrate must be dry, sound, flat / true & free of contaminants.
• Ceramic Tiles are to be fix dry. Do not soak in water.
• Mix weberset CTF grey with water (or Latex Admixture) as per the recommended mix ratio. Mechanical mixing recommended.

TILE ADHESIVE CEMENT
BRAND : WEBER
WEIGHT : 20KG
Premium grade Ceramic Tile adhesive for internal and external area, mix with weber's range of Latex Admixture for Porcelain tile fixing. 
ABOUT THE PRODUCTS
- Substrate must be dry, sound, flat / true & free of contaminants.
- Ceramic Tiles are to be fix dry.

• Concrete, Cement-Sand Render / Screed & Masonry surface must be fully cured, dry, sound, flat or true & free of contaminants eg. grease, oil, dust, loose particles, laitance etc.
• Steel / Metal surface must be free of scales, rust, grease, oil etc.
• Damp the surface before coating and sweep the excess water to avoid ponding on the horizontal area.