BUILDING MATERIALS, WATER PROOFING
Selected tag
Tag Selection
- BUILDING MATERIALS (169)
- WATER PROOFING (79)
- TILES (35)
- WEBER (59)
- SUPER STAR (1)
- SUPERFLEX 21 (1)
- ONE FIX (1)
- SIMEN GUM (13)
- TILE ADHESIVE (19)
- TILE GROUT (6)
- GROUT (2)
- ADMIXTURE (4)
- WEBERDRY WP 100-SF (1)
- WEBERDRY (4)
- CIMENT GROUT (6)
- Coating (3)
- OUTDOOR WATER PROOFING (3)
- WEBERDRY PUD COAT (1)
- WEBERDRY BITU COAT (1)
- WATER PROOFING COATING (1)
- WEBERDRY FLEXI COAT (1)
- GREEN SEAL (10)
- GREEN SHIELD 108 (1)
- SHIELD (1)
- WATERPROOFING MEMBRANE (10)
- CONCRETE WATERPROOFING (7)
- CRYSTALIZATION (7)
- CEMENT (32)
- MAPEI (19)
- PLANISEAL 223 PLUS (1)
Specifications
SKU: mapei 223
TECHNICAL CHARACTERISTICS
Planiseal 233 Plus is a two-component mortar, composed of a fiber-reinforced, cement-based compund, selected graded aggregates, special additives and synthetic polymers in water dispersion, blended according to a formula developed in the MAPEI research laboratories.
More Details...
Greenseal Flexi 201 is a flexible cementitious waterproofing that consists of two components. It consists of Portland cement, and selected well graded sand, formulated with specially selected and graded fine quartz and high quality latex to create brushable, smooth slurry with excellent bond and adhesion to most substrates.
More Details...
Greenshield 108 is an excellent energy conserving elastic coating designed for roof, walls and substrates that requires heat reflective & waterproofing protection. Greenshield 108 is a “green” product that is eco-friendly and is safe for both the applicator and the environment. It is recommended for exterior use for all residential and commercial buildings.
More Details...
- New concrete should be cured for at least 28 days and should have a pull off strength ≥1.5 N/mm².
More Details...
- New concrete should be cured for at least 28 days and should have a pull off strength 1.5 N/mm². Cement or mineral based substrates must be prepared mechanically using abrasive blast cleaning or scarifying equipment to remove cement laitance and to achieve an open textured surface.
More Details...
- Provide a durable,flexible,seamless waterproofing tanking system
- Suitable for application & provides good adhesion to substrates
- Provides waterproofing system where Ceramic Tiles etc, can be fixed directly, using Belle's range adhesive
- User friendly, less time consuming and cleaner
wo-component with latex cementitious coating, which can be simply achieved by mixing a prepacked powder with a formulated admixture, and subsequent painting the slurry on various substrates. It protects a wide range of buildings and structural concrete components with excellent resistance to water, long-term weathering and scratching.
More Details...
- Concrete, Cement-Sand Render / Screed & Masonry surface must be fully cured, dry, sound, flat or true & free of contaminants eg. grease, oil, dust, loose particles, laitance etc.
- Steel / Metal surface must be free of scales, rust, grease, oil etc.
- Damp the surface before coating and sweep the excess water to avoid ponding on the horizontal area.
More Details...
- Concrete, Cement-Sand Render / Screed & Masonry surface must be fully cured, dry, sound, flat or true & free of contaminants eg. grease, oil, dust, loose particles, laitance etc.
- Steel / Metal surface must be free of scales, rust, grease, oil etc.
- Damp the surface before coating and sweep the excess water to avoid ponding on the horizontal area.
More Details...
ready to use, multi-function, synthetic latex admixture, suitable for a variety of building applications.
- Introducing WEBERFILL EPOXY GROUT, a multi-colored, chemical and waterproof epoxy resin-based grout from MAN KIAN HARDWARE & TRADING SDN BHD that brings exceptional durability and aesthetic appeal to your tiling projects.
More Details...
- During tiling allocate minimum joints of 2mm wide for wall tiling & 3 mm wide for floor tiling.
- Allow adhesive bed to set 24 hours before grouting commences.
- Ensure that joints are dry, clean or free of contaminants.
- Mix weberfill fine grout with Clean Water (or webermix GT-mix I) as per the recommended mix ratio.
More Details...
- Substrate must be dry, sound, flat / true & free of contaminants.
- Ceramic Tiles are to be fix dry. Do not soak in water.
- Mix weberset super star with water (or Latex Admixture) as per the recommended mix ratio. Mechanical mixing recommended.
More Details...
- Substrate must be dry, sound, flat / true & free of contaminants.
- Ceramic Tiles are to be fix dry. Do not soak in water.
- Mix weberset x'tra flex with water (or Latex Admixture) as per the recommended mix ratio. Mechanical mixing recommended.
More Details...
- Substrate must be dry, sound, flat / true & free of contaminants.
- Ceramic Tiles are to be fix dry. Do not soak in water.
- Mix weberset easy flex with water (or Latex Admixture) as per the recommended mix ratio. Mechanical mixing recommended.
More Details...
TILE ADHESIVE CEMENT
BRAND : WEBER
WEIGHT : 25KG
COLOUR : GREY
Tile adhesive for large Porcelain tiles on wall and floor.
ABOUT THE PRODUCT
-Substrate must be dry, sound, flat / true & free of contaminants.
-Ceramic Tiles are to be fix dry. Do not soak in water.
More Details...
- Substrate must be dry, sound, flat / true & free of contaminants.
- Ceramic Tiles are to be fix dry. Do not soak in water.
- Mix weberset CTF grey with water (or Latex Admixture) as per the recommended mix ratio. Mechanical mixing recommended.
More Details...
TILE ADHESIVE CEMENT
BRAND : WEBER
WEIGHT : 20KG
Premium grade Ceramic Tile adhesive for internal and external area, mix with weber's range of Latex Admixture for Porcelain tile fixing.
ABOUT THE PRODUCTS
- Substrate must be dry, sound, flat / true & free of contaminants.
- Ceramic Tiles are to be fix dry.
More Details...
Good quality C1 tile adhesive
Good bond strength (0.5 - 0.7 N/ mm)
Easy to apply with good workability
Good for porous ceramic tiles
25 kg bag
- Concrete, Cement-Sand Render / Screed & Masonry surface must be fully cured, dry, sound, flat or true & free of contaminants eg. grease, oil, dust, loose particles, laitance etc.
- Steel / Metal surface must be free of scales, rust, grease, oil etc.
- Damp the surface before coating and sweep the excess water to avoid ponding on the horizontal area.
More Details...