Function of the Aluminium ferrule is to form a Sling eye for bearing point by swage it using splicing machine for wire rope size 9mm to 60mm, for wire rope size below 2mm can swage using Manual hand swager. The efficiency of the termination for Aluminium Ferrule splicing is 90% of the wire rope breaking strength with proper splicing technique and standard length ferrule. Short type ferrule is not allow for Lifting Wire Rope Sling making. By using aluminium ferrule for wire rope termination could save time (significant for large diameter wire rope) and still acheive the same termination efficiency as Flemish eye (technique use before Aluminium ferrule splicing being widely used).
The turnback ferrule system is easy to use. It is quick, safe and has proved itself to be totally reliable. The ferrules are thoroughly specified and very well defined for many different wire rope applications.
The ferrules can be used for fibre core single layer wire ropes, steel core single layer wire ropes, rotation resistant wire ropes and spiral strand ropes.
Material: Aluminum
Marking: According to standard
Standard: EN 13411-3
except size range
Note: See the manufacturer's product data sheet in the tab "Documents" for guidance on dimension selection.
