*Please Whatsapp us for building materials or bulk order, we will provide special offer for you. Thank you
Specifications
SKU: GT MIX I
Weight(grams): 25000
Dimension: 30 cm (Length) x 20 cm (Width) x 50 cm (Height)
-
As some solid matter in webermix GT mix I may settle during storage, it is essential to stir well before use in temperature lower than 4°C
-
Allow adhesive bed to set, usually 24 – 48 hours before grouting commences. Joints must be dry and free of contaminants ie. Loose particles, dust, laitance etc
-
webermix GT mix I is ready to use; therefore does not require further addition of water
-
Cement-based grout modified with webermix GT mix I, should be applied in the normal approved procedure (similar as when mixed with water only)
-
Apply grout to small areas at a time & completely fill the joints with a rubber squeegee or grout float
-
The working time (pot life) of grout modified with webermix GT mix I may be reduced slightly. The drying time may also be shorter, particularly where higher concentration of admixture is used.
-
The finish colour shade of cement-based grout mix with water may not be similar compared to those mixed with webermix GT mix I.
-
For uniform colour, ensure that the same mix proportions is used throughout the installation